- Available in threaded (1/2" - 3") or flanged (2-1/2" - 6")
- 2-Way and 3-Way
- Equal percentage flow
- Stainless steel stem and trim
- 2-position or precision modulating control of hot and chilled water or steam
- Accurate positioning with equal percentage and linear flow characteristics to ensure state-of-the-art temperature control
| FEATURE | FUNCTION | BENEFIT |
| Forged Brass valve body | Higher pressures in the forging process align the grains of metal | Smoother, not as heavy as cast Bronze valves for same ANSI 250 pressure class rating |
| Standard actuator connection | Only hand tightening requiredEliminates separate actuator-to-valve linkage | - No tools required to install - Fewer parts to order, install, and maintain - Simpler product selection - Easy Pneumatic to Electronic interchangeReduces installation time |
| Standard stroke-5.5 mm | Precise balance of stroke vs. performance | Allows high performance flow control with minimal product size |
| Spring range built-in to valve (1/2” to 1” line sizes only) for pneumatic actuator | Allows single part number for actuator | Reduces selection complexity and inventory for service parts |
| 2-way (Normally Open/Normally Closed) and 3-way (Mixing) | Valves available for all applications | Allows consistent use of product throughout a system |
| Choice of Brass (25 psi) or Stainless (50 psi) trim | Provides a range of performance and cost | Single product family may be used in demanding performance situations and also be cost competitive in lower stress environments |
| ½” to 1” line size, 0.40 to 25 Cv | Large range of end connection options | Minimizes the need for reducers and ancillary pipe fittings |
| Meet ANSI/FCI 70.2 Standard Class IV valve seat leakage specification | Valve seat leakage is less than 0.01% of Cv at rated close-off pressure | Tight shut-off of controlled device eliminates overheating/cooling and reduces energy consumption |
| Parabolic control plugs | Provides accurate flow control curves at an affordable price point | Best price/performance combination |
| Double O-ring packing construction | Single packing for water applications 32°F to 250°F, 15 psig steam | One valve to stock |
| No-service stem packing | Long-life packing, lubricated for life of valve | Minimize service time – valve is disposable at end of service life |
| Choice of end connections | Union fitting options allow easy service replacement of worn valve assemblies | - Basic FxF NPT valve is price competitive with all industry valves - Fitting options allow for easy access to valve components by quickly removing valve from line |